Water bubbles are small but dangerous.

    They can cause serious health problems.

    And, in the worst cases, they can also lead to death.

    If you’re struggling to find a solution, here’s how to remove one from your tank.

    Water bubbles are tiny, red particles of water that float on top of a water molecule.

    When the water bubble bursts, the water molecules in the tank explode and spill their contents over the surrounding area.

    When that happens, water can bubble through the porous surface of the tank, potentially leading to a fatal explosion.

    Here’s how:1.

    Get your water supply tested.

    This can take a few days or a week, depending on your location.

    Some people have to wait weeks for their water supply to be tested.2.

    Take a closer look.

    If the bubble appears small, you may need to get a closer inspection.

    If so, try the bubble with a small needle.

    It may help to hold the needle with both hands and gently squeeze the bubble.3.

    Remove the bubble and inspect the water supply.

    You may have to use a spoon to remove the bubble, but that can be easier if you have a smaller needle.

    The smaller the needle, the easier it is to remove.

    If your water bottle is large, try to squeeze it with your fingers.4.

    Rinse out the water from the hose.

    You can also take the water out of the hose with your hands.

    If it bubbles up, it can be removed by soaking it in hot water for a few minutes.5.

    Clean the bubbles with a water-based cleaning product.

    You should rinse the water and soap off your tank with the cleaner you can find.

    You will need to do this several times over the course of a day or so to make sure the bubbles are cleaned.6.

    Re-assemble your tank once it’s clear.

    Some tanks have a plastic cap on the top of the pipe, which is very easy to remove once the bubble is removed.

    Other tanks have metal clips, so it’s a bit more work to reassemble.

    But, if you’re able to remove all of the bubbles, you should be good to go.7.

    Test your water.

    Your water supply may have been tested before.

    If that is the case, it will likely have a label showing that your water has been tested.

    If not, you’ll need to ask the water company to do the testing.

    You might also need to check the tank for leaks.

    If there are no leaks, you can test your tank for safety with a device called a leak-test kit.

    The kit tests the tank to see if it is leaking or not.

    The tank should be able to pass the test, but if the tank leaks, the tank should have a warning label on it.8.

    If everything looks good, your water tank should still be safe to use.

    It will take time to completely replace your tank and test it, so you may not have time to fully reasolve your water situation.

    If your tank is leaking, you might want to test for leaks on your own.

    You could check your water line, fill-up the tank and see if your tank will leak again.

    You’ll also need a test kit that can test the contents of your tank, as well as a water test kit to test your water chemistry.

    If none of those are available, it’s possible you could have to get an expert to test it for you.

    You’d also need the expertise of a doctor to check for a water problem.

    Here are some other things to consider:If you think you may have a water leak, check your tap or water pipe for bubbles.

    Check the water in your tank regularly to make certain it’s safe to drink.

    You don’t want to drink water that has bubbles in it, but you should also check the contents to make your water safe.

    If all the bubbles on the outside of your water pipe appear to be normal, then you’re safe to add water to your tank to test the condition of the water.